Warranty

Warranty Terms and Conditions

ANZ Wheels warrants to its original purchasers including Agents and Distributors and no others in the event of any wheel during the first 24 months from the date of purchase developing any fault due to bad or faulty workmanship. In provision of bad or poor quality materials the company will repair or replace ( at it's option ) the wheel, free of charge, on the basis the product in question is returned to ANZ Wheels. Any structural fault of the wheel is covered by a lifetime warranty, excluding wheels damaged in accidents, by misuse or abuse.

In the event of any nut, cap, stud or washer, within 24 months from the purchase of the item, developing any fault due to bad or faulty workmanship or the provision of bad or poor quality materials, the company will repair or replace ( at it's option ) such nut, cap, stud or washer free of charge provided that such item is returnedto the company, freight prepaid, by the person completing and returning it to the company with the section hereinafter provided for;

Warranties do not extend to any damaged caused -

  1. to the clear coating on the wheel;
  2. by accident, negligence or misuse occurring to the wheels whilst in transit;
  3. the wheel is not the size specified or by improper tyre mounting;
  4. by use of the wheel other than in accordance with normal road usage or damage or structural failure occurring as a result of racing applications;
  5. by alteration or repair to the wheel's configuration from that of it's original specifications;
  6. by partial or full disassembly and reassembly, any tampering of assembly nuts and bolts. Any interference to specifications;
  7. there is corrosion to the wheels due to chemicals or climatic conditions;
  8. each wheel has been manufactured using good quality material and proper workmanship;
  9. each wheel has been manufactured for use upon motor vehicles travelling at proper speeds upon highways and roads in accordance with normal safe driving procedures.
  10. each wheel has been manufactured to suit certain applications in accordance with normal fitting procedures

Save and accept for the warranties contained herein and any other warranties prescribed expressly by legislation within the commonwealth state and territories of Australia, the company makes no warranty in respect of each wheel.

The company has manufactured each wheel for use upon motor vehicles travelling at proper speeds upon highways and roads in accordance with normal safe driving procedures. If it is intended to use the wheel for other purposes, then you should contact the company directly in writing before so doing. Failure to do so may affect any warranty or entitlement you may have at law.

Save and except for any express warranty contained herein, any express warranty previously made by the company as to quality and performance or characteristics of each wheel in so far as may be permitted by law, is hereby withdrawn.

ANZ Wheels is not responsible for any incidental, special or consequential damages, including, but not limited to, loss of time, loss of profits, inconvenience or loss of the use of the vehicle and or costs associated there with;

All warranty and repair work to be carried out by ANZ Wheels, Victoria, Australia.

  1. Tyre and wheel bead must be the same size.
  2. Each wheel must be fitted / tried on drum or hub prior to fitting tyres to ensure adequate clearance.
  3. Do not use spacers or modify wheel to solve interference problems.
  4. Check to ensure that neither hub or wheel stud are damaged.
  5. ANZ Wheels are supplied with new wheel nuts. These must be used when fitting new wheels to ensure that the taper on the nut matches correctly with that on the wheel.
  6. Mount the tyre according to the tyre mounting machine manufacturers instructions for aluminium alloy wheels, protecting surfaces of the wheel with a cover to avoid scratching or scraping.
  7. It is highly recommend that all wheels and tyres be balanced and use conventional adhesive weights on all alloy wheels.
  8. Wheel nuts or bolts must be tightened as per the following diagram to the manufacturers recommended wheel nut torque requirements.
  9. Re-check wheel nut tension after first 150 km and again periodically.

To promote long life and attractive appearance regularly clean wheels using a mild detergent in warm water unless other specified instructions are provided by the manufacturer for the cleaning of the wheel. Wash wheels with running water and dry with clean chamois. We do not advise use of an abrasive on painted surfaces.